RECYCLING WIRE STRIPPERS MANUAL
RECYCLING WIRE STRIPPERS FULL

It also keeps the wire straight as it's being slit. Using the device this way prevents you from getting cut on the blade, if you set it as I describe below. It is possible for the end of one of your wires to fling up and smack you in the face. You'll want to wear gloves for sure and possibly eye protection. You will also need some way of holding the device that can withstand a significant amount of force. One of those blades that is already scored so when the tip gets dull you just snap it off and you have a new, sharp tip. I used the blade out of my utility knife. You can buy similar pieces of metal at any hardware or hobby store in many thicknesses. I had some aluminum plates that were used as shims in a large format scanner. To do it well you'll need several thicknesses of metal.

The materials you'll need can be just about anything. I needed something to hold the knife and the wire in a consistent position while I ran the blade along the length of the wire. These stripping machines are used for cutting the insulation off most wire scrap to extract the clean copper core for maximum recycling value.Įach Stripping Tool model was designed by our mechanics to be the best value in its class.I came up with this when I had some wire to strip and found that using a utility knife to hand slit the insulation just wasn't going to work.

RECYCLING WIRE STRIPPERS FULL

If you have questions about the BWS-38-Motor wire stripper for recycling please call us: 86īluedog wire stripping machines carry a full line of Copper and Aluminum Wire Strippers. Great price, wire stripper for recycling scrap copper wire. If you want a wire stripper for recycling this machine will do the trick. As the BWS-38-Motor is just easier to use and requires less setup time.

RECYCLING WIRE STRIPPERS MANUAL

If you’re considering purchasing a manual drill powered wire stripper, without a doubt, you will be glad you chose a motorized machine. The BWS-38-motor copper wire stripper features a 1/2 hp motor x 110v and can strip anywhere from 16 AWG up to 500 MCM with no problem.

You can expect to strip 1000’s of lbs of scrap copper with this machine easily and hassle-free. This machine is very populator with individual Electricians and Scrapers and Recyclers. Wire stripper for Recycling – BWS-38-Motor The BWS-38-Motor is a great machine for anyone who looking to scrap medium amounts of scrap wire. Unlike many machines on the market, the BWS-38-Motor is an automatic wire stripper and self adjusts to the scrap wire its fed. Remember, any wire stripper which requires constant manual adjusting to strip wire is not cost-effective.

In fact, it’s so easy to operate, almost anyone can use it to strip off the insulation from your scrap wire. The BWS-38-Motor is light, fast and simple to use. This means the insulation is removed and stripped down to bare bright copper without any manual adjusting of the machine. This machine features a multi-feed design, which means you just put the wire into the right sized feed hole and the machine strips away. One of Bluedog’s most popular wire stripper for recycling scrap copper wire is our BWS-38-MOTOR. Share on Facebook Share on Twitter Share on Linkedin Share on Pinterest Share on Xing Share on Reddit

Recycling wire strippers